• Seismic zone III compliant RCC frame structure.
• Solid concrete block masonry.

• Stone cladding on sections of external wall faces

• Foyer; Living; Dining.
  – Imported marble with coordinated skirting.
• Bedrooms
  – Imported marble with coordinated skirting
• Kitchen
  – 2’*2’ Vitrified tiles with coordinated skirting
  – 1’*2’ backsplash glazed tile up to 2’ above counter.
• Balcony
  – 2’*2’ Vitrified tiles with coordinated skirting.
• Utility
  – 2’*2’ Vitrified non-skid tiles with suitable dado 1’*2” in wet area up to 3’ height.
• Toilet
  – 1’*2’ Vitrified non-skid tiles with suitable dado up to ceiling height.
• Terrace Decks
  – All-weather proof tiles.

• Polished black granite platform with double nose edge at ergonomic 32” from the floor, over RCC counter supported by suitable brickwork.
• Stainless steel single bowl sink and draining board in kitchen and utility of Nirali or equivalent make.
•  Provision for exhaust.

• Main Door
  – 7’6” Height –Solid Timber Teak wood door shutter along with suitable frame. Doors Melamine polished finish. Yale or equivalent brand lock with Stainless Steel fittings.
• Internal Doors
  – 7’6” Height – Factory finished 32mm thick Veneer door shutter along with suitable frame. Yale or equivalent brand Locks with Stainless Steel fittings. For Toilet Doors – One side Veneer and other side – Painted or laminated.
• Windows
  – Aluminium sliding, clear glass frames & bug screens with Saint- Gobain glass or equivalent.
• French Doors
  – Schuco/ equivalent sliding, clear glass frames & bug screens with Saint- Gobain glass or equivalent.
• Grills
  – MS Grills fixed on to the walls. Zinc Chromate Anti corrosive primer with Enamel Paint.

• Sanitary ware
  – Grohe / Duravit / Roca or equivalent. EWC wall mounted with concealed tank, Counter wash basin in all Bedroom Toilets & Powder room.

• C.P. Fittings
  – Grohe / Roca or equivalent.

• C.P. Fittings
  – Single lever hot and cold-water mixer unit for high pressure showers.
  – Concealed master-controlled stop cock in each restroom on the inside for easy maintenance.
  – Provision for Geyser in all the toilets.
  – Hot water connection in all wash basins.
  – Hot water connections in the Kitchen.
  
   

• Internal walls
  Finished with Asian putty, one coat of primer, two coats of Asian paint emulsion with roller finish.
• Internal ceilings
  Finished with Asian putty, emulsion (Asian Paints) roller finish.
• Exterior walls
  Weatherproof exterior emulsion.

• TV, telephone and modem points in all bedrooms and living room.
• Electrical distribution & concealed wiring suitable for 3-phase power supply.
• Fire-resistant electrical wires of Finolex or Anchor make.
• Switches and sockets of Scheneider/Legrand or equivalent make.
• Air-conditioning points in all rooms.
• One MCB for each room in the main distribution box in each residence.
• Three phase power supply.

All products like switches and accessories, PVC conduits, switchgear, wiring cable etc. are compliant with IS code of Practice for electrical wiring.

• Ground floor lobby – Polished granite combination design flooring with matched skirting.
• Upper Floor Lobbies – Polished granite slab with matched skirting. – Stone cladding around elevator.
• Staircases – Granite flooring with skirting – 3Handrails with MS grill work

• Landscaping – Landscaped garden with seating – Greenery along compound wall, and on terrace.
• Elevator – One 10 passenger capacity elevator of Mitsubishi or equivalent make.
• Generator – 100% power backup with generator of suitable rating to support all electrical requirement including air-conditioning.
• Security – Access control lobby doors. – CCTV cameras in common areas. – Video door bell.

• Rainwater harvesting system.
• OH tank with float switch.
• Pressure pump.

• Toilets for drivers/servants.

• Solar cells as per CMDA norms.

• Electric vehicle charging station.

(While all reasonable care has been taken in providing the information, thespecifications mentioned are subject to change, as may be required by the Developer an d Architect, whose decision will be final. Any change in specifications would be equivalent to or of a higher standard.)