• Seismic zone III compliant RCC frame structure.

• Solid concrete block masonry.

• Stone cladding on sections of external wall faces.

• Foyer; Living; Dining.
  – 4’*2’ Vitrified tiles with coordinated skirting.
• Bedrooms
  – 2’*2’ Vitrified tiles with coordinated skirting.
• Kitchen
  – 2’*2’ Vitrified tiles with coordinated skirting
  – 1’*2’ backsplash glazed tile up to 2’ above counter.
• Balcony
  – 2’*2’ Vitrified tiles with coordinated skirting.
• Utility
  – 2’*2’ Vitrified non-skid tiles with suitable dado 1’*2” in wet area up to 3’ height.
• Toilet
  – 1’*2’ Vitrified non-skid tiles with suitable dado up to 7’6” height.
• Terrace Decks
  – All-weather proof tiles.

• Polished black granite platform with double nose edge at ergonomic 32” from the floor, over RCC counter supported by suitable brickwork.

• Stainless steel single bowl sink and draining board in kitchen and utility of Nirali or equivalent make.

•  Provision for exhaust.

• Main Door
  – 7’6” Height –Solid Timber Teak wood door shutter along with suitable frame.

  – Doors Melamine polished finish. Yale or equivalent brand lock with Stainless Steel fittings.

• Internal Doors
  – 7’6” Height – Factory finished 32mm thick Veneer door shutter along with suitable frame. Yale or equivalent brand Locks with Stainless Steel fittings. For Toilet Doors – One side Veneer and other side – Painted or laminated
• Windows
  – UPVC/ equivalent sliding, clear glass frames & bug screens with Saint- Gobain

  glass or equivalent.

• French Doors
  – UPVC/ equivalent sliding, clear glass frames with Saint-Gobain glass or
• Grills
  – MS Grills fixed on to the walls. Zinc Chromate Anti corrosive primer with Enamel Paint.

• Sanitary ware
  – Kohler/Roca or equivalent. EWC wall mounted with concealed tank, under Counter wash basin in all Bedroom Toilets & Powder room.

• Internal walls
  

  – Finished with Asian putty, one coat of primer, two coats of Asian paint emulsion with roller finish.

• Internal ceilings
  – Finished with Asian putty, emulsion (Asian Paints) roller finish.
• Exterior walls
  – Weatherproof exterior emulsion.

• TV, telephone and modem points in all bedrooms and living room.
• Electrical distribution & concealed wiring suitable for 3-phase power supply.
• Fire-resistant electrical wires of Finolex or Anchor make.
• Switches and sockets of Scheneider/Legrand or equivalent make.
• Air-conditioning points in all rooms.
• One MCB for each room in the main distribution box in each residence.
• Three phase power supply.

All products like switches and accessories, PVC conduits, switchgear, wiring cable etc. are compliant with IS code of Practice for electrical wiring.

• Ground floor lobby
  – Polished granite combination design flooring with matched skirting.
• Upper Floor Lobbies
  – Polished granite slab with matched skirting                                                                                                                                       – Polished granite slab with matched skirting

• Staircases
  – Granite flooring with skirting                                                                                                                                                              – 3Handrails with MS grill work

• Pavement
  – Paving with granolithic flooring/concrete interlock pavers.
  – Drains along the compound wall to divert rain water to rain harvesting pit.
• Landscaping
  – Brick kerbs and drains along the compound wall to divert rain water to rain harvesting pit.                                                          – Greenery along compound wall, and on terrace.       

• Elevator
  – One 6 passengers capacity elevator of Johnson or equivalent make.
• Generator
  – 100% power backup with generator of suitable rating to support all electrical requirement

  including air-conditioning.

• Security
  – Access control lobby doors.
  – CCTV cameras in common areas.
  – Video door bell.

• Rain water harvesting system.
• OH tank with float switch.
• Pressure pump.
• Toilet for drivers/staff.
• Solar cells as per CMDA norms.
• Electrical & high pressure water points in car park area.
• Electric vehicle charging station.

(While all reasonable care has been taken in providing the information, thespecifications mentioned are subject to change, as may be required by the Developer an d Architect, whose decision will be final. Any change in specifications would be equivalent to or of a higher standard.)